Megavolts to Statvolts Converter

Convert megavolts to statvolts instantly with our free voltage conversion calculator. Enter any value for accurate results.

MV
=
stV
3,335.64
Statvolts (stV)
1 MV = 3,335.64 stV
🔄 Swap Units (Statvolts → Megavolts)
1 MV
=
3,335.64 stV
1 Megavolt = 3,335.641 Statvolts

How to Convert Megavolts to Statvolts

To convert a voltage measurement from megavolts to statvolts, multiply the voltage by the conversion factor. Since one megavolt is equal to 3,335.641 statvolts, you can use this formula:

statvolts = megavolts × 3,335.641

The voltage in statvolts is equal to the megavolts multiplied by 3,335.641.

Example: Convert 5 megavolts to statvolts.

Using the formula: statvolts = megavolts × 3,335.641

statvolts = 5 MV × 3,335.641 = 16,678.2 stV

Therefore, 5 megavolts equals 16,678.2 statvolts.

How Many Statvolts Are in a Megavolt?

There are 3,335.641 statvolts in one megavolt.

1 MV = 3,335.641 stV

What Is a Megavolt?

The megavolt (symbol: MV) is a unit of electric potential equal to one million (106) volts. The prefix “mega” denotes a factor of 106 in the International System of Units. Megavolts are encountered in ultra-high-voltage power transmission, particle accelerators, and atmospheric physics. The highest-voltage transmission lines in the world operate at 1,000–1,200 kV (1.0–1.2 MV), used in China and other countries for long-distance power transport. In particle physics, linear accelerators and Van de Graaff generators can produce potentials of several megavolts to accelerate charged particles. Medical linear accelerators (linacs) used in radiation therapy operate at 4–25 MV. A lightning bolt involves potential differences of approximately 100–300 MV between the cloud and the ground. The breakdown voltage of air is approximately 3 MV per metre under standard conditions, so a 100 m gap requires about 300 MV to produce a spark — consistent with the length of typical lightning channels.

One megavolt is equal to:

  • 106 volts (V)
  • 1,000 kilovolts (kV)
  • 109 millivolts (mV)
  • 0.001 gigavolts (GV)
  • 3,335.64 statvolts (stV)
  • 1014 abvolts (abV)

What Is a Statvolt?

The statvolt (symbol: stV) is the unit of electric potential in the centimetre–gram–second (CGS) Gaussian and electrostatic (ESU) systems of units. One statvolt equals exactly 299.792458 volts — a value derived from the speed of light (c = 299,792,458 m/s). The statvolt arises naturally in the CGS Gaussian system, where the relationship between electric and magnetic quantities incorporates the speed of light directly into the unit definitions. The conversion factor 299.792458 is exactly c/(106), where c is the speed of light in metres per second. Statvolts were used in theoretical physics, particularly in electrodynamics and plasma physics, before the widespread adoption of SI units. The CGS Gaussian system has the advantage that many electromagnetic equations take simpler forms (without factors of 4πε0 or μ0). Today, statvolts are mainly encountered in older physics literature, in some branches of plasma physics, and in theoretical work where the CGS Gaussian system simplifies calculations. The unit provides an interesting example of how the speed of light connects electric and magnetic units.

One statvolt is equal to:

  • 299.792458 volts (V)
  • 299,792.458 millivolts (mV)
  • 0.299792 kilovolts (kV)
  • 2.99792 × 10−4 megavolts (MV)
  • 2.99792 × 1010 abvolts (abV)
  • 2.99792 × 108 microvolts (μV)

Understanding Voltage Units

Voltage (also called electric potential difference or electromotive force) is a measure of the work needed to move a unit electric charge from one point to another in an electric field. It is one of the most fundamental quantities in electricity and electronics, analogous to pressure in a water system.

Ohm’s law (V = I × R) relates voltage (V) to current (I) and resistance (R), and the power equation (P = V × I) connects voltage to electrical power. These relationships are the foundation of all electrical engineering.

Major Voltage Unit Systems

  • SI units (V with metric prefixes): The volt (V) is the SI derived unit of electric potential. Standard metric prefixes produce nanovolts (nV), microvolts (μV), millivolts (mV), kilovolts (kV), megavolts (MV), and gigavolts (GV). Each prefix step is a factor of 1,000.
  • CGS electrostatic unit — Statvolt (stV): The voltage unit in the Gaussian/ESU system. One statvolt equals exactly 299.792458 V, a factor derived from the speed of light. Used in some theoretical physics contexts.
  • CGS electromagnetic unit — Abvolt (abV): The voltage unit in the EMU system. One abvolt equals exactly 10−8 V (10 nanovolts). An extremely small unit, primarily of historical interest.

Voltage in Everyday Life

  • Batteries: AA/AAA cells = 1.5 V, 9 V battery, car battery = 12 V, smartphone = 3.7–4.2 V.
  • Household mains: 120 V (North America, Japan) or 230 V (Europe, Asia, Africa) at 50 or 60 Hz AC.
  • USB power: USB 2.0/3.0 = 5 V, USB-C PD = 5/9/15/20 V (up to 48 V in Extended Power Range).
  • Power transmission: 110–765 kV for long-distance lines, 4–35 kV for local distribution.
  • Lightning: 100–300 MV potential difference, 20,000–200,000 A peak current.
  • Static electricity: Walking on carpet can generate 1–25 kV.

Converting Between Voltage Units

SI voltage conversions follow simple powers of 10: each metric prefix step (nano → micro → milli → base → kilo → mega → giga) is a factor of 1,000. For CGS units, the key factors are: 1 stV = 299.792458 V (from the speed of light) and 1 abV = 10−8 V (exact).

Tips for Voltage Conversions

  • For SI prefix conversions (nV, μV, mV, V, kV, MV, GV), each step is a factor of 1,000. So 1 kV = 1,000 V = 1,000,000 mV, and 1 V = 1,000 mV = 1,000,000 μV.
  • The statvolt factor (299.792458 V) comes from the speed of light: c = 299,792,458 m/s, and 1 stV = c/(106) V. This is an exact value.
  • The abvolt is exactly 10 nanovolts (10−8 V). This is a very small voltage — it takes 100 million abvolts to make 1 volt.
  • The relationship between statvolts and abvolts involves c²: 1 stV = c² × 10−8 abV ≈ 2.998 × 1010 abV.
  • When dealing with very large or very small numbers, scientific notation is helpful: 1 GV = 109 V, and 1 nV = 10−9 V.
  • Don’t confuse voltage (electric potential, measured in volts) with current (charge flow, measured in amperes) or resistance (opposition to current, measured in ohms). Voltage “pushes” current through resistance.
  • In practice, kilovolts are the most common “large” voltage unit (power lines, X-rays), while millivolts and microvolts are common “small” units (sensors, biomedical signals).

Megavolts to Statvolts Conversion Table

The following table shows conversions from megavolts to statvolts.

MegavoltsStatvolts (stV)
1 MV3,335.64
2 MV6,671.28
3 MV10,006.9
4 MV13,342.6
5 MV16,678.2
6 MV20,013.8
7 MV23,349.5
8 MV26,685.1
9 MV30,020.8
10 MV33,356.4
11 MV36,692.1
12 MV40,027.7
13 MV43,363.3
14 MV46,699
15 MV50,034.6
16 MV53,370.3
17 MV56,705.9
18 MV60,041.5
19 MV63,377.2
20 MV66,712.8
21 MV70,048.5
22 MV73,384.1
23 MV76,719.7
24 MV80,055.4
25 MV83,391
26 MV86,726.7
27 MV90,062.3
28 MV93,397.9
29 MV96,733.6
30 MV100,069
31 MV103,405
32 MV106,741
33 MV110,076
34 MV113,412
35 MV116,747
36 MV120,083
37 MV123,419
38 MV126,754
39 MV130,090
40 MV133,426

Related Voltage Converters

Convert from Megavolts

Convert to Statvolts