Megavolts to Millivolts Converter

How to Convert Megavolts to Millivolts

To convert a voltage measurement from megavolts to millivolts, multiply the voltage by the conversion factor. Since one megavolt is equal to 10⁹ millivolts, you can use this formula:

The voltage in millivolts is equal to the megavolts multiplied by 10⁹.

How Many Millivolts Are in a Megavolt?

There are 10⁹ millivolts in one megavolt.

What Is a Megavolt?

The megavolt (symbol: MV) is a unit of electric potential equal to one million (10⁶) volts. The prefix “mega” denotes a factor of 10⁶ in the International System of Units. Megavolts are encountered in ultra-high-voltage power transmission, particle accelerators, and atmospheric physics. The highest-voltage transmission lines in the world operate at 1,000–1,200 kV (1.0–1.2 MV), used in China and other countries for long-distance power transport. In particle physics, linear accelerators and Van de Graaff generators can produce potentials of several megavolts to accelerate charged particles. Medical linear accelerators (linacs) used in radiation therapy operate at 4–25 MV. A lightning bolt involves potential differences of approximately 100–300 MV between the cloud and the ground. The breakdown voltage of air is approximately 3 MV per metre under standard conditions, so a 100 m gap requires about 300 MV to produce a spark — consistent with the length of typical lightning channels.

One megavolt is equal to:

• 10⁶ volts (V)
• 1,000 kilovolts (kV)
• 10⁹ millivolts (mV)
• 0.001 gigavolts (GV)
• 3,335.64 statvolts (stV)
• 10¹⁴ abvolts (abV)

What Is a Millivolt?

The millivolt (symbol: mV) is a unit of electric potential equal to one thousandth (10⁻³) of a volt. The prefix “milli” denotes a factor of 10⁻³ in the International System of Units. Millivolts are commonly encountered in sensor technology, biomedical engineering, and thermoelectric measurements. Thermocouples generate voltage outputs in the millivolt range: a type K thermocouple produces approximately 41 μV per °C, giving about 4.1 mV for a 100 °C temperature difference. In electrochemistry, electrode potentials and the voltage outputs of pH meters and ion-selective electrodes are often in the millivolt range. A standard pH electrode produces approximately 59.2 mV per pH unit at 25 °C (the Nernst slope). Solar cells generate open-circuit voltages of several hundred millivolts per cell (typically 500–700 mV for silicon cells). In audio, line-level signals are typically 300 mV to 2 V, while headphone signals may be 100–500 mV.

One millivolt is equal to:

• 0.001 volts (V)
• 1,000 microvolts (μV)
• 10⁶ nanovolts (nV)
• 10⁻⁶ kilovolts (kV)
• 3.3356 × 10⁻⁶ statvolts (stV)
• 10⁵ abvolts (abV)

Understanding Voltage Units

Voltage (also called electric potential difference or electromotive force) is a measure of the work needed to move a unit electric charge from one point to another in an electric field. It is one of the most fundamental quantities in electricity and electronics, analogous to pressure in a water system.

Ohm’s law (V = I × R) relates voltage (V) to current (I) and resistance (R), and the power equation (P = V × I) connects voltage to electrical power. These relationships are the foundation of all electrical engineering.

Major Voltage Unit Systems

• SI units (V with metric prefixes): The volt (V) is the SI derived unit of electric potential. Standard metric prefixes produce nanovolts (nV), microvolts (μV), millivolts (mV), kilovolts (kV), megavolts (MV), and gigavolts (GV). Each prefix step is a factor of 1,000.
• CGS electrostatic unit — Statvolt (stV): The voltage unit in the Gaussian/ESU system. One statvolt equals exactly 299.792458 V, a factor derived from the speed of light. Used in some theoretical physics contexts.
• CGS electromagnetic unit — Abvolt (abV): The voltage unit in the EMU system. One abvolt equals exactly 10⁻⁸ V (10 nanovolts). An extremely small unit, primarily of historical interest.

Voltage in Everyday Life

• Batteries: AA/AAA cells = 1.5 V, 9 V battery, car battery = 12 V, smartphone = 3.7–4.2 V.
• Household mains: 120 V (North America, Japan) or 230 V (Europe, Asia, Africa) at 50 or 60 Hz AC.
• USB power: USB 2.0/3.0 = 5 V, USB-C PD = 5/9/15/20 V (up to 48 V in Extended Power Range).
• Power transmission: 110–765 kV for long-distance lines, 4–35 kV for local distribution.
• Lightning: 100–300 MV potential difference, 20,000–200,000 A peak current.
• Static electricity: Walking on carpet can generate 1–25 kV.

Converting Between Voltage Units

SI voltage conversions follow simple powers of 10: each metric prefix step (nano → micro → milli → base → kilo → mega → giga) is a factor of 1,000. For CGS units, the key factors are: 1 stV = 299.792458 V (from the speed of light) and 1 abV = 10⁻⁸ V (exact).

Tips for Voltage Conversions

• For SI prefix conversions (nV, μV, mV, V, kV, MV, GV), each step is a factor of 1,000. So 1 kV = 1,000 V = 1,000,000 mV, and 1 V = 1,000 mV = 1,000,000 μV.
• The statvolt factor (299.792458 V) comes from the speed of light: c = 299,792,458 m/s, and 1 stV = c/(10⁶) V. This is an exact value.
• The abvolt is exactly 10 nanovolts (10⁻⁸ V). This is a very small voltage — it takes 100 million abvolts to make 1 volt.
• The relationship between statvolts and abvolts involves c²: 1 stV = c² × 10⁻⁸ abV ≈ 2.998 × 10¹⁰ abV.
• When dealing with very large or very small numbers, scientific notation is helpful: 1 GV = 10⁹ V, and 1 nV = 10⁻⁹ V.
• Don’t confuse voltage (electric potential, measured in volts) with current (charge flow, measured in amperes) or resistance (opposition to current, measured in ohms). Voltage “pushes” current through resistance.
• In practice, kilovolts are the most common “large” voltage unit (power lines, X-rays), while millivolts and microvolts are common “small” units (sensors, biomedical signals).

Megavolts to Millivolts Conversion Table

The following table shows conversions from megavolts to millivolts.

Related Voltage Converters

Convert from Megavolts

Convert to Millivolts