Megavolts to Abvolts Converter

How to Convert Megavolts to Abvolts

To convert a voltage measurement from megavolts to abvolts, multiply the voltage by the conversion factor. Since one megavolt is equal to 10¹⁴ abvolts, you can use this formula:

The voltage in abvolts is equal to the megavolts multiplied by 10¹⁴.

How Many Abvolts Are in a Megavolt?

There are 10¹⁴ abvolts in one megavolt.

What Is a Megavolt?

The megavolt (symbol: MV) is a unit of electric potential equal to one million (10⁶) volts. The prefix “mega” denotes a factor of 10⁶ in the International System of Units. Megavolts are encountered in ultra-high-voltage power transmission, particle accelerators, and atmospheric physics. The highest-voltage transmission lines in the world operate at 1,000–1,200 kV (1.0–1.2 MV), used in China and other countries for long-distance power transport. In particle physics, linear accelerators and Van de Graaff generators can produce potentials of several megavolts to accelerate charged particles. Medical linear accelerators (linacs) used in radiation therapy operate at 4–25 MV. A lightning bolt involves potential differences of approximately 100–300 MV between the cloud and the ground. The breakdown voltage of air is approximately 3 MV per metre under standard conditions, so a 100 m gap requires about 300 MV to produce a spark — consistent with the length of typical lightning channels.

One megavolt is equal to:

• 10⁶ volts (V)
• 1,000 kilovolts (kV)
• 10⁹ millivolts (mV)
• 0.001 gigavolts (GV)
• 3,335.64 statvolts (stV)
• 10¹⁴ abvolts (abV)

What Is a Abvolt?

The abvolt (symbol: abV) is the unit of electric potential in the centimetre–gram–second (CGS) electromagnetic (EMU) system of units. One abvolt equals exactly 10⁻⁸ volts (10 nanovolts). The abvolt is an extremely small unit of voltage. It would take 100 million abvolts to equal one volt. The prefix “ab” in CGS electromagnetic units stands for “absolute,” referring to the absolute electromagnetic system developed in the 19th century. In the CGS-EMU system, the abvolt is defined as the potential difference across a conductor when a current of one abampere (= 10 A) dissipates one erg per second (= 10⁻⁷ W) of power. This definition parallels the SI definition of the volt but uses CGS base units. The abvolt is primarily of historical and theoretical interest today. It appears in older physics texts and in the study of electromagnetic unit systems. The relationship between the abvolt and the statvolt is: 1 statvolt = c² × 10⁻⁸ abvolts ≈ 2.998 × 10¹⁰ abvolts, where c is the speed of light in cm/s.

One abvolt is equal to:

• 10⁻⁸ volts (V)
• 10⁻⁵ millivolts (mV)
• 0.01 microvolts (μV)
• 10 nanovolts (nV)
• 3.3356 × 10⁻¹¹ statvolts (stV)
• 10⁻¹¹ kilovolts (kV)

Understanding Voltage Units

Voltage (also called electric potential difference or electromotive force) is a measure of the work needed to move a unit electric charge from one point to another in an electric field. It is one of the most fundamental quantities in electricity and electronics, analogous to pressure in a water system.

Ohm’s law (V = I × R) relates voltage (V) to current (I) and resistance (R), and the power equation (P = V × I) connects voltage to electrical power. These relationships are the foundation of all electrical engineering.

Major Voltage Unit Systems

• SI units (V with metric prefixes): The volt (V) is the SI derived unit of electric potential. Standard metric prefixes produce nanovolts (nV), microvolts (μV), millivolts (mV), kilovolts (kV), megavolts (MV), and gigavolts (GV). Each prefix step is a factor of 1,000.
• CGS electrostatic unit — Statvolt (stV): The voltage unit in the Gaussian/ESU system. One statvolt equals exactly 299.792458 V, a factor derived from the speed of light. Used in some theoretical physics contexts.
• CGS electromagnetic unit — Abvolt (abV): The voltage unit in the EMU system. One abvolt equals exactly 10⁻⁸ V (10 nanovolts). An extremely small unit, primarily of historical interest.

Voltage in Everyday Life

• Batteries: AA/AAA cells = 1.5 V, 9 V battery, car battery = 12 V, smartphone = 3.7–4.2 V.
• Household mains: 120 V (North America, Japan) or 230 V (Europe, Asia, Africa) at 50 or 60 Hz AC.
• USB power: USB 2.0/3.0 = 5 V, USB-C PD = 5/9/15/20 V (up to 48 V in Extended Power Range).
• Power transmission: 110–765 kV for long-distance lines, 4–35 kV for local distribution.
• Lightning: 100–300 MV potential difference, 20,000–200,000 A peak current.
• Static electricity: Walking on carpet can generate 1–25 kV.

Converting Between Voltage Units

SI voltage conversions follow simple powers of 10: each metric prefix step (nano → micro → milli → base → kilo → mega → giga) is a factor of 1,000. For CGS units, the key factors are: 1 stV = 299.792458 V (from the speed of light) and 1 abV = 10⁻⁸ V (exact).

Tips for Voltage Conversions

• For SI prefix conversions (nV, μV, mV, V, kV, MV, GV), each step is a factor of 1,000. So 1 kV = 1,000 V = 1,000,000 mV, and 1 V = 1,000 mV = 1,000,000 μV.
• The statvolt factor (299.792458 V) comes from the speed of light: c = 299,792,458 m/s, and 1 stV = c/(10⁶) V. This is an exact value.
• The abvolt is exactly 10 nanovolts (10⁻⁸ V). This is a very small voltage — it takes 100 million abvolts to make 1 volt.
• The relationship between statvolts and abvolts involves c²: 1 stV = c² × 10⁻⁸ abV ≈ 2.998 × 10¹⁰ abV.
• When dealing with very large or very small numbers, scientific notation is helpful: 1 GV = 10⁹ V, and 1 nV = 10⁻⁹ V.
• Don’t confuse voltage (electric potential, measured in volts) with current (charge flow, measured in amperes) or resistance (opposition to current, measured in ohms). Voltage “pushes” current through resistance.
• In practice, kilovolts are the most common “large” voltage unit (power lines, X-rays), while millivolts and microvolts are common “small” units (sensors, biomedical signals).

Megavolts to Abvolts Conversion Table

The following table shows conversions from megavolts to abvolts.

Related Voltage Converters

Convert from Megavolts

Convert to Abvolts