Picocoulombs to Nanocoulombs Converter

Convert picocoulombs to nanocoulombs instantly with our free electric charge conversion calculator. Enter any value for accurate results.

pC
=
nC
0.001
Nanocoulombs (nC)
1 pC = 0.001 nC
🔄 Swap Units (Nanocoulombs → Picocoulombs)
1 pC
=
0.001 nC
1 Picocoulomb = 0.001 Nanocoulombs

How to Convert Picocoulombs to Nanocoulombs

To convert an electric charge measurement from picocoulombs to nanocoulombs, divide the charge value by the conversion factor. Since one picocoulomb is equal to 0.001 nanocoulombs, you can use this formula:

nanocoulombs = picocoulombs ÷ 1,000

The charge in nanocoulombs is equal to the picocoulombs divided by 1,000.

Example: Convert 5 picocoulombs to nanocoulombs.

Using the formula: nanocoulombs = picocoulombs ÷ 1,000

nanocoulombs = 5 pC ÷ 1,000 = 0.005 nC

Therefore, 5 picocoulombs equals 0.005 nanocoulombs.

How Many Nanocoulombs Are in a Picocoulomb?

There are 0.001 nanocoulombs in one picocoulomb.

1 pC = 0.001 nC

What Is a Picocoulomb?

The picocoulomb (symbol: pC) is a unit of electric charge equal to one trillionth (10−12) of a coulomb. The prefix "pico" denotes a factor of 10−12. Picocoulombs are used in high-precision measurements of very small charges, particularly in particle physics, radiation detection, and advanced semiconductor characterization. Particle detectors and scintillation counters often produce signals measured in picocoulombs. In nuclear and particle physics, the charge produced by a single ionizing particle passing through a detector element is typically a few picocoulombs. Charge-sensitive preamplifiers used in these applications are designed to measure signals in the picocoulomb range with high accuracy. Picocoulombs are also relevant in accelerometer and pressure sensor calibration, where piezoelectric elements produce charges proportional to applied mechanical forces. The sensitivity of these sensors is often expressed in picocoulombs per unit of force or acceleration.

One picocoulomb is equal to:

  • 10−12 coulombs (C)
  • 10−9 millicoulombs (mC)
  • 0.000001 microcoulombs (μC)
  • 0.001 nanocoulombs (nC)
  • 10−13 abcoulombs (abC)
  • ≈ 0.002998 statcoulombs (stC)
  • ≈ 6,241,509 electron charges (e)
  • ≈ 2.778 × 10−16 ampere-hours (Ah)
  • ≈ 2.778 × 10−13 milliampere-hours (mAh)

What Is a Nanocoulomb?

The nanocoulomb (symbol: nC) is a unit of electric charge equal to one billionth (10−9) of a coulomb. The prefix "nano" denotes a factor of 10−9. Nanocoulombs are used in semiconductor physics, integrated circuit design, and precision electrostatics. The charge stored on small capacitors in CMOS logic circuits is typically in the nanocoulomb range. For example, a 100 pF capacitor charged to 5V stores 0.5 nC of charge. In radiation dosimetry, nanocoulombs are used to measure the ionization charge produced by radiation in ion chambers. Medical physics instruments and environmental radiation monitors often report readings in nanocoulombs. Nanocoulombs also appear in the characterization of electrostatic discharge (ESD) events in electronics manufacturing, where even tiny amounts of charge can damage sensitive semiconductor components.

One nanocoulomb is equal to:

  • 10−9 coulombs (C)
  • 0.000001 millicoulombs (mC)
  • 0.001 microcoulombs (μC)
  • 1,000 picocoulombs (pC)
  • 10−10 abcoulombs (abC)
  • ≈ 2.998 statcoulombs (stC)
  • ≈ 6.2415 × 109 electron charges (e)
  • ≈ 2.778 × 10−13 ampere-hours (Ah)
  • ≈ 2.778 × 10−10 milliampere-hours (mAh)

Understanding Electric Charge

Electric charge is a fundamental physical property of matter that causes it to experience a force when placed in an electromagnetic field. Charge comes in two types: positive and negative. Like charges repel each other, while opposite charges attract, as described by Coulomb's law.

The SI unit of electric charge is the coulomb (C), defined as the charge transported by a constant current of one ampere in one second. In the microscopic world, charge is quantized — it always appears in integer multiples of the elementary charge e ≈ 1.602 × 10−19 C, which is the magnitude of charge carried by a single electron or proton.

Electric charge is conserved in all physical processes: the total charge in an isolated system never changes. This conservation law is one of the most fundamental principles in physics and is closely related to the gauge symmetry of electromagnetism.

Measurement Systems

Three main unit systems are used for electric charge:

  • SI (International System): Uses the coulomb and its metric prefixes (mC, μC, nC, pC). This is the modern standard used worldwide in science and engineering.
  • CGS-ESU (Electrostatic): Uses the statcoulomb (or franklin), defined through Coulomb's law with the proportionality constant set to 1. Common in theoretical physics.
  • CGS-EMU (Electromagnetic): Uses the abcoulomb, where 1 abC = 10 C. Historically used in electromagnetic theory.

Practical Charge Units

In addition to the fundamental units, two practical units are widely used:

  • Ampere-hour (Ah): Equal to 3,600 C. Used for battery capacity ratings of large batteries (car batteries, industrial cells).
  • Milliampere-hour (mAh): Equal to 3.6 C. The standard unit for consumer electronics battery capacity (smartphones, tablets, wireless devices).
  • Electron charge (e): The fundamental quantum of charge, ≈ 1.602 × 10−19 C. Used in atomic and particle physics.

Electric Charge in Everyday Life

  • A typical lightning bolt transfers about 5 coulombs of charge
  • A static electricity shock involves about 1–10 microcoulombs
  • A smartphone battery (3,000 mAh) stores about 10,800 coulombs
  • A car battery (60 Ah) stores about 216,000 coulombs
  • A single electron carries 1.602 × 10−19 coulombs

Tips for Electric Charge Conversions

  • For SI prefix conversions (C, mC, μC, nC, pC), each step is a factor of 1,000. Moving from a larger prefix to a smaller one means multiplying by 1,000 for each step.
  • To convert between coulombs and ampere-hours, remember: 1 Ah = 3,600 C. Divide coulombs by 3,600 to get ampere-hours.
  • Battery capacity in mAh can be converted to coulombs by multiplying by 3.6. For example, a 5,000 mAh battery stores 18,000 coulombs.
  • The electron charge (e) involves extremely large or small numbers. When converting to/from electron charges, scientific notation is essential.
  • CGS units (statcoulombs, abcoulombs) are rarely used in modern practice. If you encounter them in older literature, remember: 1 abC = 10 C, and 1 C ≈ 3 × 109 stC.
  • When working with battery specifications, note that capacity (mAh or Ah) alone doesn't determine energy storage — you also need to know the voltage. Energy (Wh) = Capacity (Ah) × Voltage (V).

Picocoulombs to Nanocoulombs Conversion Table

The following table shows conversions from picocoulombs to nanocoulombs.

PicocoulombsNanocoulombs (nC)
1 pC0.001
2 pC0.002
3 pC0.003
4 pC0.004
5 pC0.005
6 pC0.006
7 pC0.007
8 pC0.008
9 pC0.009
10 pC0.01
11 pC0.011
12 pC0.012
13 pC0.013
14 pC0.014
15 pC0.015
16 pC0.016
17 pC0.017
18 pC0.018
19 pC0.019
20 pC0.02
21 pC0.021
22 pC0.022
23 pC0.023
24 pC0.024
25 pC0.025
26 pC0.026
27 pC0.027
28 pC0.028
29 pC0.029
30 pC0.03
31 pC0.031
32 pC0.032
33 pC0.033
34 pC0.034
35 pC0.035
36 pC0.036
37 pC0.037
38 pC0.038
39 pC0.039
40 pC0.04

Related Electric Charge Converters

Convert from Picocoulombs

Convert to Nanocoulombs