Milliampere-Hours to Nanocoulombs Converter

How to Convert Milliampere-Hours to Nanocoulombs

To convert an electric charge measurement from milliampere-hours to nanocoulombs, multiply the charge value by the conversion factor. Since one milliampere-hour is equal to 3.6 × 10⁹ nanocoulombs, you can use this formula:

The charge in nanocoulombs is equal to the milliampere-hours multiplied by 3.6 × 10⁹.

How Many Nanocoulombs Are in a Milliampere-Hour?

There are 3.6 × 10⁹ nanocoulombs in one milliampere-hour.

What Is a Milliampere-Hour?

The milliampere-hour (symbol: mAh) is a unit of electric charge equal to one thousandth of an ampere-hour. It represents the charge conveyed by a current of one milliampere flowing for one hour, which equals 3.6 coulombs. Milliampere-hours are the most common unit for rating the capacity of small rechargeable batteries used in portable electronics. Smartphone batteries are typically rated at 3,000–5,000 mAh, wireless earbuds at 30–60 mAh per earbud, and laptop batteries at 40,000–100,000 mAh (or equivalently 40–100 Wh at a given voltage). The milliampere-hour provides an intuitive measure of battery life: a 3,000 mAh battery can theoretically supply 3,000 mA (3 A) for one hour, or 300 mA for 10 hours, or 100 mA for 30 hours. However, actual battery life depends on many factors including discharge rate, temperature, and battery age. While not an SI unit, the milliampere-hour is ubiquitous in the consumer electronics industry and is printed on virtually every rechargeable battery. It has become the de facto standard for communicating battery capacity to consumers.

One milliampere-hour is equal to:

• 3.6 coulombs (C)
• 3,600 millicoulombs (mC)
• 3,600,000 microcoulombs (μC)
• 3.6 × 10⁹ nanocoulombs (nC)
• 3.6 × 10¹² picocoulombs (pC)
• 0.36 abcoulombs (abC)
• ≈ 1.079 × 10¹⁰ statcoulombs (stC)
• ≈ 2.247 × 10¹⁹ electron charges (e)
• 0.001 ampere-hours (Ah)

What Is a Nanocoulomb?

The nanocoulomb (symbol: nC) is a unit of electric charge equal to one billionth (10⁻⁹) of a coulomb. The prefix "nano" denotes a factor of 10⁻⁹. Nanocoulombs are used in semiconductor physics, integrated circuit design, and precision electrostatics. The charge stored on small capacitors in CMOS logic circuits is typically in the nanocoulomb range. For example, a 100 pF capacitor charged to 5V stores 0.5 nC of charge. In radiation dosimetry, nanocoulombs are used to measure the ionization charge produced by radiation in ion chambers. Medical physics instruments and environmental radiation monitors often report readings in nanocoulombs. Nanocoulombs also appear in the characterization of electrostatic discharge (ESD) events in electronics manufacturing, where even tiny amounts of charge can damage sensitive semiconductor components.

One nanocoulomb is equal to:

• 10⁻⁹ coulombs (C)
• 0.000001 millicoulombs (mC)
• 0.001 microcoulombs (μC)
• 1,000 picocoulombs (pC)
• 10⁻¹⁰ abcoulombs (abC)
• ≈ 2.998 statcoulombs (stC)
• ≈ 6.2415 × 10⁹ electron charges (e)
• ≈ 2.778 × 10⁻¹³ ampere-hours (Ah)
• ≈ 2.778 × 10⁻¹⁰ milliampere-hours (mAh)

Understanding Electric Charge

Electric charge is a fundamental physical property of matter that causes it to experience a force when placed in an electromagnetic field. Charge comes in two types: positive and negative. Like charges repel each other, while opposite charges attract, as described by Coulomb's law.

The SI unit of electric charge is the coulomb (C), defined as the charge transported by a constant current of one ampere in one second. In the microscopic world, charge is quantized — it always appears in integer multiples of the elementary charge e ≈ 1.602 × 10⁻¹⁹ C, which is the magnitude of charge carried by a single electron or proton.

Electric charge is conserved in all physical processes: the total charge in an isolated system never changes. This conservation law is one of the most fundamental principles in physics and is closely related to the gauge symmetry of electromagnetism.

Measurement Systems

Three main unit systems are used for electric charge:

• SI (International System): Uses the coulomb and its metric prefixes (mC, μC, nC, pC). This is the modern standard used worldwide in science and engineering.
• CGS-ESU (Electrostatic): Uses the statcoulomb (or franklin), defined through Coulomb's law with the proportionality constant set to 1. Common in theoretical physics.
• CGS-EMU (Electromagnetic): Uses the abcoulomb, where 1 abC = 10 C. Historically used in electromagnetic theory.

Practical Charge Units

In addition to the fundamental units, two practical units are widely used:

• Ampere-hour (Ah): Equal to 3,600 C. Used for battery capacity ratings of large batteries (car batteries, industrial cells).
• Milliampere-hour (mAh): Equal to 3.6 C. The standard unit for consumer electronics battery capacity (smartphones, tablets, wireless devices).
• Electron charge (e): The fundamental quantum of charge, ≈ 1.602 × 10⁻¹⁹ C. Used in atomic and particle physics.

Electric Charge in Everyday Life

• A typical lightning bolt transfers about 5 coulombs of charge
• A static electricity shock involves about 1–10 microcoulombs
• A smartphone battery (3,000 mAh) stores about 10,800 coulombs
• A car battery (60 Ah) stores about 216,000 coulombs
• A single electron carries 1.602 × 10⁻¹⁹ coulombs

Tips for Electric Charge Conversions

• For SI prefix conversions (C, mC, μC, nC, pC), each step is a factor of 1,000. Moving from a larger prefix to a smaller one means multiplying by 1,000 for each step.
• To convert between coulombs and ampere-hours, remember: 1 Ah = 3,600 C. Divide coulombs by 3,600 to get ampere-hours.
• Battery capacity in mAh can be converted to coulombs by multiplying by 3.6. For example, a 5,000 mAh battery stores 18,000 coulombs.
• The electron charge (e) involves extremely large or small numbers. When converting to/from electron charges, scientific notation is essential.
• CGS units (statcoulombs, abcoulombs) are rarely used in modern practice. If you encounter them in older literature, remember: 1 abC = 10 C, and 1 C ≈ 3 × 10⁹ stC.
• When working with battery specifications, note that capacity (mAh or Ah) alone doesn't determine energy storage — you also need to know the voltage. Energy (Wh) = Capacity (Ah) × Voltage (V).

Milliampere-Hours to Nanocoulombs Conversion Table

The following table shows conversions from milliampere-hours to nanocoulombs.

Related Electric Charge Converters

Convert from Milliampere-Hours

Convert to Nanocoulombs