Torr to Pounds per Square Foot Converter

How to Convert Torr to Pounds per Square Foot

To convert a pressure measurement from torr to pounds per square foot, multiply the pressure value by the conversion factor. Since one torr is equal to 2.784496 pounds per square foot, you can use this formula:

The pressure in pounds per square foot is equal to the torr multiplied by 2.784496.

How Many Pounds per Square Foot Are in a Torr?

There are 2.784496 pounds per square foot in one torr.

What Is a Torr?

The torr (symbol: Torr) is a unit of pressure named after the Italian physicist Evangelista Torricelli, who invented the barometer. One torr is defined as exactly 1/760 of a standard atmosphere, which equals approximately 133.322 pascals. The torr is essentially equivalent to the millimetre of mercury (mmHg) for most practical purposes, though they differ by less than 0.000015%. One torr equals exactly 101,325/760 Pa, while 1 mmHg is defined by the pressure of a 1 mm column of mercury at 0 °C. The torr is widely used in vacuum science and technology. Vacuum levels are often categorised using the torr: low vacuum (25–760 Torr), medium vacuum (10⁻³–25 Torr), high vacuum (10⁻⁹–10⁻³ Torr), and ultra-high vacuum (below 10⁻⁹ Torr). In medicine, blood pressure is measured in mmHg (essentially torr). Normal blood pressure is about 120/80 mmHg, meaning the systolic pressure is about 120 Torr and the diastolic pressure is about 80 Torr. In semiconductor manufacturing, process chamber pressures are specified in torr or millitorr. Sputtering processes typically operate at 1–100 mTorr, and chemical vapour deposition (CVD) at 0.1–10 Torr.

One torr is equal to:

• 133.322 pascals (Pa)
• 1.33322 hectopascals (hPa)
• 0.00133322 bars (bar)
• 1.33322 millibars (mbar)
• 0.00131579 atmospheres (atm)
• 0.019337 pounds per square inch (psi)
• 2.78450 pounds per square foot (psf)

What Is a Pound per Square Foot?

The pound per square foot (symbol: psf or lbf/ft²) is a unit of pressure in the US customary and imperial systems, defined as the pressure exerted by a force of one pound-force on an area of one square foot. One psf equals approximately 47.88 pascals. The psf is widely used in structural engineering, architecture, and construction in the United States for specifying loads on floors, roofs, and other structural elements. Building codes such as ASCE 7 specify design loads in pounds per square foot. Typical floor live loads in US building codes are: residential buildings 40 psf, offices 50 psf, retail stores 75–100 psf, and assembly areas 100 psf. Roof snow loads vary by region from 5 to over 300 psf. Wind pressures on building surfaces are typically 15–60 psf depending on wind speed and building geometry. The psf is related to the psi by a factor of 144, since 1 square foot equals 144 square inches (1 psi = 144 psf). In geotechnical engineering, soil bearing capacities and pressures are commonly expressed in psf. A typical bearing capacity for medium-stiff clay is 1,500–3,000 psf, and for dense gravel it can be 4,000–8,000 psf.

One pound per square foot is equal to:

• 47.8803 pascals (Pa)
• 0.478803 hectopascals (hPa)
• 4.78803 × 10⁻⁴ bars (bar)
• 0.478803 millibars (mbar)
• 4.7254 × 10⁻⁴ atmospheres (atm)
• 0.006944 pounds per square inch (psi)
• 0.35913 torr (Torr)

Understanding Pressure Units

Pressure is the force applied perpendicular to a surface per unit area (P = F/A). It is a fundamental concept in physics, engineering, meteorology, medicine, and many other fields. Pressure is a scalar quantity, meaning it acts equally in all directions within a fluid at a given point.

The wide variety of pressure units reflects the diverse fields in which pressure is measured. The pascal (SI) is the international standard, but industry-specific units like psi, bar, atm, and torr remain firmly established in their respective domains.

Major Pressure Unit Families

• SI units: The pascal (Pa) is the SI unit of pressure. With prefixes: hectopascal (hPa = 100 Pa), kilopascal (kPa = 1,000 Pa), megapascal (MPa = 10⁶ Pa), gigapascal (GPa = 10⁹ Pa).
• Bar units: The bar (100,000 Pa) and millibar (100 Pa) are metric units widely used in industry and meteorology. The millibar equals the hectopascal exactly.
• Atmospheric units: The standard atmosphere (101,325 Pa) is a reference pressure used in chemistry and physics. The torr (1/760 atm) is used in vacuum science.
• Gravitational metric units: The kgf/cm² (technical atmosphere) and kgf/m² use gravitational force units on metric areas.
• Imperial / US customary units: Pounds per square inch (psi) and pounds per square foot (psf) are standard in US engineering and construction.

Pressure in Everyday Life

• Atmosphere: Standard atmospheric pressure at sea level is about 101.3 kPa (14.7 psi, 1013 hPa, 760 Torr). This is the weight of the air column above us.
• Tyres: Car tyre pressure is typically 30–35 psi (2.0–2.4 bar). Under-inflated tyres waste fuel and wear unevenly.
• Blood pressure: Measured in mmHg (≈ Torr). Normal is about 120/80 mmHg. High blood pressure (hypertension) is above 140/90 mmHg.
• Weather: Barometric pressure ranges from about 870–1085 hPa. Falling pressure indicates approaching storms; rising pressure indicates clearing skies.
• Water pressure: Pressure increases by about 1 atm per 10 m (33 ft) of water depth. At the bottom of the Mariana Trench (~11 km), pressure exceeds 1,000 atm.

Converting Between Pressure Units

All pressure units measure the same physical quantity, so converting between them requires multiplying by the appropriate conversion factor. The factor is the ratio of how many pascals one unit of the source contains divided by how many pascals one unit of the target contains.

Key conversion constants: 1 atm = 101,325 Pa = 1.01325 bar = 14.696 psi = 760 Torr. Also, 1 bar = 100,000 Pa and 1 psi ≈ 6,894.76 Pa.

Tips for Pressure Conversions

• The hectopascal and millibar are exactly equal (1 hPa = 1 mbar = 100 Pa). They can be used interchangeably.
• The bar is very close to the atmosphere: 1 atm = 1.01325 bar. For rough estimates, 1 bar ≈ 1 atm.
• Quick psi ↔ bar conversion: 1 bar ≈ 14.5 psi. So divide psi by 14.5 to get bars, or multiply bars by 14.5 to get psi.
• For atm ↔ psi: 1 atm ≈ 14.7 psi. A common tyre pressure of 32 psi is about 2.2 atm (gauge) or 3.2 atm (absolute).
• The torr is nearly equal to 1 mmHg. For blood pressure and vacuum measurements, they’re practically interchangeable.
• Exactly 760 torr = 1 atm. This comes from the original barometer definition.
• For kgf/cm² ↔ bar: they’re very close. 1 kgf/cm² = 0.981 bar. For rough work, 1 kgf/cm² ≈ 1 bar.
• Remember that 1 psi = 144 psf (since 1 ft² = 144 in²). This is an exact relationship.
• Be aware of gauge vs. absolute pressure. Gauge pressure is measured relative to atmospheric pressure (0 psig = 1 atm absolute = 14.7 psia).

Torr to Pounds per Square Foot Conversion Table

The following table shows conversions from torr to pounds per square foot.

Related Pressure Converters

Convert from Torr

Convert to Pounds per Square Foot