Statmhos to Millisiemens Converter

How to Convert Statmhos to Millisiemens

To convert an electrical conductance measurement from statmhos to millisiemens, divide the conductance value by the conversion factor. Since one statmho is equal to 1.1123 × 10^-9 millisiemens, you can use this formula:

The conductance in millisiemens is equal to the statmhos divided by 8.99 × 10⁸.

How Many Millisiemens Are in a Statmho?

There are 1.1123 × 10^-9 millisiemens in one statmho.

What Is a Statmho?

The statmho (symbol: st℧), also called the statsiemens, is a unit of electrical conductance in the centimetre–gram–second electrostatic system of units (CGS-ESU). It is the reciprocal of the statohm, the CGS-ESU unit of electrical resistance. One statmho is an extremely small amount of conductance. It equals approximately 1.112 × 10⁻¹² siemens (about 1.112 picosiemens). Conversely, one siemens equals approximately 8.99 × 10¹¹ statmhos. The conversion factor between statmhos and siemens involves the speed of light in vacuum (c ≈ 2.998 × 10¹⁰ cm/s), reflecting the fundamental connection between electric and magnetic quantities in the CGS system. Specifically, 1 siemens = c²/10⁹ statmhos, where c is the speed of light in CGS units. The statmho is primarily of theoretical and historical interest. It appears in older physics literature that uses Gaussian or CGS-ESU units, particularly in classical electrodynamics and theoretical physics. Modern engineering and applied physics use SI units (siemens) exclusively for conductance measurements.

One statmho is equal to:

• ≈ 1.112 × 10⁻¹² siemens (S)
• ≈ 1.112 × 10⁻⁹ millisiemens (mS)
• ≈ 1.112 × 10⁻⁶ microsiemens (μS)
• ≈ 1.112 × 10⁻¹⁵ kilosiemens (kS)
• ≈ 1.112 × 10⁻¹⁸ megasiemens (MS)
• ≈ 1.112 × 10⁻¹² mhos (℧)
• ≈ 1.112 × 10⁻⁶ micromhos (μ℧)
• ≈ 1.112 × 10⁻²¹ abmhos (ab℧)

What Is a Millisiemens?

The millisiemens (symbol: mS) is a unit of electrical conductance equal to one thousandth (10⁻³) of a siemens. The prefix "milli" denotes a factor of 10⁻³ in the metric system. Millisiemens are commonly used in water quality testing and environmental science. The electrical conductivity of water is a key indicator of its purity and dissolved mineral content. Distilled water has very low conductivity (a few microsiemens per centimetre), while seawater has a conductivity of about 50 millisiemens per centimetre. In soil science and agriculture, electrical conductivity measured in millisiemens per centimetre or metre is used to assess soil salinity. High salinity can impair plant growth, so conductivity measurements are essential for irrigation management and land reclamation. The millisiemens is also used in medical diagnostics, particularly in bioelectrical impedance analysis (BIA), which measures the electrical conductivity of body tissues to estimate body composition (fat mass, lean mass, water content).

One millisiemens is equal to:

• 0.001 siemens (S)
• 1,000 microsiemens (μS)
• 0.000001 kilosiemens (kS)
• 10⁻⁹ megasiemens (MS)
• 0.001 mhos (℧)
• 1,000 micromhos (μ℧)
• 10⁻¹² abmhos (ab℧)
• ≈ 899,000,000 statmhos (st℧)

Understanding Electrical Conductance

Electrical conductance is a measure of how easily electric current flows through a material or component. It is the reciprocal of electrical resistance: a component with high conductance allows current to flow easily (low resistance), while one with low conductance impedes current flow (high resistance).

The SI unit of conductance is the siemens (S), defined as one ampere per volt (A/V). The siemens replaced the older unit name "mho" (ohm spelled backwards) in 1971, though both names represent the same quantity. Conductance G is related to resistance R by the simple equation: G = 1/R.

Conductance depends on the material's conductivity (σ), the cross-sectional area (A) of the conductor, and its length (L): G = σA/L. Materials with high conductivity, such as copper and silver, are used as electrical conductors, while materials with low conductivity, such as rubber and glass, are used as insulators.

Measurement Systems

Three main unit systems are used for electrical conductance:

• SI (International System): Uses the siemens and its metric prefixes (μS, mS, kS, MS). This is the modern standard used worldwide in science and engineering.
• MKS/Practical: Uses the mho and micromho, which are older names for the siemens and microsiemens. These units are still commonly encountered, especially in American engineering practice.
• CGS-EMU (Electromagnetic): Uses the abmho (= 10⁹ S), a very large unit from the electromagnetic CGS system.
• CGS-ESU (Electrostatic): Uses the statmho (≈ 1.112 × 10⁻¹² S), a very small unit from the electrostatic CGS system.

Conductance vs. Conductivity

It is important to distinguish between conductance and conductivity:

• Conductance (G): A property of a specific component or sample, measured in siemens (S). It depends on the material, geometry, and temperature.
• Conductivity (σ): An intrinsic property of a material, measured in siemens per metre (S/m). It is independent of the sample's size or shape.

For a uniform conductor, conductance is related to conductivity by: G = σ × A / L, where A is the cross-sectional area and L is the length.

Practical Applications

• Water quality testing: Conductivity in μS/cm or mS/cm indicates dissolved mineral content and water purity
• Electronics: Component conductance in siemens or millisiemens is used in circuit analysis and design
• Power systems: Admittance (complex conductance) in siemens is used for power flow analysis and fault calculations
• Materials science: Metal conductivity in MS/m characterizes how well materials conduct electricity
• Soil science: Electrical conductivity in mS/cm assesses soil salinity for agriculture
• Medical diagnostics: Bioimpedance measurements use conductance to estimate body composition

Tips for Electrical Conductance Conversions

• For SI prefix conversions (S, mS, μS, kS, MS), each step is a factor of 1,000. Moving from a larger unit to a smaller one means multiplying by 1,000 for each prefix step.
• The siemens and the mho are exactly equal (1 S = 1 ℧). Similarly, the microsiemens and micromho are exactly equal (1 μS = 1 μ℧). These are just different names for the same units.
• The abmho is an extremely large unit: 1 ab℧ = 10⁹ S = 1 gigasiemens. Most practical conductance values are a tiny fraction of an abmho.
• The statmho is an extremely small unit: 1 st℧ ≈ 1.112 × 10⁻¹² S ≈ 1.112 picosiemens. Most practical conductance values are billions of statmhos.
• CGS units (abmhos, statmhos) are rarely used in modern practice. If you encounter them in older literature, use the conversion factors: 1 ab℧ = 10⁹ S and 1 S ≈ 8.99 × 10¹¹ st℧.
• To convert conductance to resistance, take the reciprocal: R (ohms) = 1 / G (siemens). For example, 0.5 S = 1/0.5 = 2 Ω.
• Water conductivity is typically expressed in μS/cm or mS/cm. To convert between them: 1 mS/cm = 1,000 μS/cm. Pure water has about 0.055 μS/cm, while seawater has about 50,000 μS/cm (50 mS/cm).

Statmhos to Millisiemens Conversion Table

The following table shows conversions from statmhos to millisiemens.

Related Electrical Conductance Converters

Convert from Statmhos

Convert to Millisiemens