Pounds per Square Inch to Kilograms per Square Centimeter Converter

How to Convert Pounds per Square Inch to Kilograms per Square Centimeter

To convert a pressure measurement from pounds per square inch to kilograms per square centimeter, divide the pressure value by the conversion factor. Since one pound per square inch is equal to 0.070307 kilograms per square centimeter, you can use this formula:

The pressure in kilograms per square centimeter is equal to the pounds per square inch divided by 14.22334.

How Many Kilograms per Square Centimeter Are in a Pound per Square Inch?

There are 0.070307 kilograms per square centimeter in one pound per square inch.

What Is a Pound per Square Inch?

The pound per square inch (symbol: psi or lbf/in²) is a unit of pressure in the US customary and imperial systems, defined as the pressure exerted by a force of one pound-force on an area of one square inch. One psi equals approximately 6,894.76 pascals. Psi is one of the most widely used pressure units in the United States and is common in engineering, automotive, aerospace, and industrial applications. Tyre pressures, hydraulic system pressures, water line pressures, and compressed gas cylinder pressures in the US are all specified in psi. Typical tyre pressures for passenger vehicles are 30–35 psi. Residential water pressure is typically 40–80 psi. A scuba tank holds air at about 3,000 psi. Industrial hydraulic systems operate at 1,500–5,000 psi, and water-jet cutting systems use pressures of 30,000–90,000 psi. In materials testing, the tensile strength and yield strength of metals are often reported in psi or ksi (kilopounds per square inch, where 1 ksi = 1,000 psi). Structural steel typically has a yield strength of 36,000–50,000 psi. The abbreviations “psig” (gauge pressure) and “psia” (absolute pressure) are used to distinguish between pressures measured relative to atmospheric pressure and absolute vacuum, respectively.

One pound per square inch is equal to:

• 6,894.76 pascals (Pa)
• 68.9476 hectopascals (hPa)
• 0.0689476 bars (bar)
• 68.9476 millibars (mbar)
• 0.068046 atmospheres (atm)
• 0.070307 kgf/cm²
• 144 pounds per square foot (psf)
• 51.7149 torr (Torr)

What Is a Kilogram per Square Centimeter?

The kilogram-force per square centimetre (symbol: kgf/cm²) is a gravitational metric unit of pressure equal to the pressure exerted by a force of one kilogram-force on an area of one square centimetre. One kgf/cm² equals exactly 98,066.5 pascals. This unit is also called the “technical atmosphere” (symbol: at) and was widely used in engineering before the adoption of SI units. It remains common in some industries and countries, particularly for specifying pressures in older equipment and standards. In industrial applications, kgf/cm² is used for hydraulic system pressures, boiler pressures, and mechanical testing in countries that historically used the metric-gravitational system. Pressure gauges marked in kgf/cm² are still manufactured and widely used. The kgf/cm² is very close to 1 standard atmosphere (1 kgf/cm² = 0.9678 atm) and 1 bar (1 kgf/cm² = 0.98067 bar), making rough mental conversions straightforward. In some tyre pressure specifications, particularly in parts of Asia, pressures are given in kgf/cm². A typical car tyre pressure of 2.2 kgf/cm² corresponds to about 32 psi.

One kilogram per square centimeter is equal to:

• 98,066.5 pascals (Pa)
• 980.665 hectopascals (hPa)
• 0.980665 bars (bar)
• 980.665 millibars (mbar)
• 0.967841 atmospheres (atm)
• 14.2233 pounds per square inch (psi)
• 735.559 torr (Torr)

Understanding Pressure Units

Pressure is the force applied perpendicular to a surface per unit area (P = F/A). It is a fundamental concept in physics, engineering, meteorology, medicine, and many other fields. Pressure is a scalar quantity, meaning it acts equally in all directions within a fluid at a given point.

The wide variety of pressure units reflects the diverse fields in which pressure is measured. The pascal (SI) is the international standard, but industry-specific units like psi, bar, atm, and torr remain firmly established in their respective domains.

Major Pressure Unit Families

• SI units: The pascal (Pa) is the SI unit of pressure. With prefixes: hectopascal (hPa = 100 Pa), kilopascal (kPa = 1,000 Pa), megapascal (MPa = 10⁶ Pa), gigapascal (GPa = 10⁹ Pa).
• Bar units: The bar (100,000 Pa) and millibar (100 Pa) are metric units widely used in industry and meteorology. The millibar equals the hectopascal exactly.
• Atmospheric units: The standard atmosphere (101,325 Pa) is a reference pressure used in chemistry and physics. The torr (1/760 atm) is used in vacuum science.
• Gravitational metric units: The kgf/cm² (technical atmosphere) and kgf/m² use gravitational force units on metric areas.
• Imperial / US customary units: Pounds per square inch (psi) and pounds per square foot (psf) are standard in US engineering and construction.

Pressure in Everyday Life

• Atmosphere: Standard atmospheric pressure at sea level is about 101.3 kPa (14.7 psi, 1013 hPa, 760 Torr). This is the weight of the air column above us.
• Tyres: Car tyre pressure is typically 30–35 psi (2.0–2.4 bar). Under-inflated tyres waste fuel and wear unevenly.
• Blood pressure: Measured in mmHg (≈ Torr). Normal is about 120/80 mmHg. High blood pressure (hypertension) is above 140/90 mmHg.
• Weather: Barometric pressure ranges from about 870–1085 hPa. Falling pressure indicates approaching storms; rising pressure indicates clearing skies.
• Water pressure: Pressure increases by about 1 atm per 10 m (33 ft) of water depth. At the bottom of the Mariana Trench (~11 km), pressure exceeds 1,000 atm.

Converting Between Pressure Units

All pressure units measure the same physical quantity, so converting between them requires multiplying by the appropriate conversion factor. The factor is the ratio of how many pascals one unit of the source contains divided by how many pascals one unit of the target contains.

Key conversion constants: 1 atm = 101,325 Pa = 1.01325 bar = 14.696 psi = 760 Torr. Also, 1 bar = 100,000 Pa and 1 psi ≈ 6,894.76 Pa.

Tips for Pressure Conversions

• The hectopascal and millibar are exactly equal (1 hPa = 1 mbar = 100 Pa). They can be used interchangeably.
• The bar is very close to the atmosphere: 1 atm = 1.01325 bar. For rough estimates, 1 bar ≈ 1 atm.
• Quick psi ↔ bar conversion: 1 bar ≈ 14.5 psi. So divide psi by 14.5 to get bars, or multiply bars by 14.5 to get psi.
• For atm ↔ psi: 1 atm ≈ 14.7 psi. A common tyre pressure of 32 psi is about 2.2 atm (gauge) or 3.2 atm (absolute).
• The torr is nearly equal to 1 mmHg. For blood pressure and vacuum measurements, they’re practically interchangeable.
• Exactly 760 torr = 1 atm. This comes from the original barometer definition.
• For kgf/cm² ↔ bar: they’re very close. 1 kgf/cm² = 0.981 bar. For rough work, 1 kgf/cm² ≈ 1 bar.
• Remember that 1 psi = 144 psf (since 1 ft² = 144 in²). This is an exact relationship.
• Be aware of gauge vs. absolute pressure. Gauge pressure is measured relative to atmospheric pressure (0 psig = 1 atm absolute = 14.7 psia).

Pounds per Square Inch to Kilograms per Square Centimeter Conversion Table

The following table shows conversions from pounds per square inch to kilograms per square centimeter.

Related Pressure Converters

Convert from Pounds per Square Inch

Convert to Kilograms per Square Centimeter