How to Convert Nanometers to Micrometers
To convert a length measurement from nanometers to micrometers, divide the length value by the conversion factor. Since one nanometer is equal to 0.001 micrometers, you can use this formula:
The length in micrometers is equal to the nanometers divided by 1,000.
Using the formula: micrometers = nanometers ÷ 1,000
micrometers = 10 nm ÷ 1,000 = 0.01 µm
Therefore, 10 nanometers equals 0.01 micrometers.
How Many Micrometers Are in a Nanometer?
There are 0.001 micrometers in one nanometer.
What Is a Nanometer?
The nanometre (symbol: nm) is a metric unit of length equal to one billionth (10−9) of a metre, or one thousandth of a micrometre. The prefix “nano” denotes a factor of 10−9. The nanometre is the standard unit in nanotechnology, semiconductor physics, and optics. Modern computer processors are manufactured using processes measured in nanometres — current leading-edge technology uses 3–5 nm process nodes, with sub-2 nm processes under development. In optics, the wavelengths of visible light range from about 380 nm (violet) to 700 nm (red). Ultraviolet (UV) radiation has wavelengths of 10–380 nm, and infrared starts above 700 nm. These wavelength values define the colours we see and the properties of light-based technologies. In molecular science, atomic and molecular dimensions are typically in the nanometre range. A water molecule is about 0.275 nm wide, a DNA double helix is about 2 nm in diameter, and a typical protein is 5–50 nm. The spacing between atoms in a crystal lattice is typically 0.1–0.5 nm.
One nanometer is equal to:
- 10−9 metres (m)
- 0.001 micrometres (μm)
- 10−6 millimetres (mm)
- 10−7 centimetres (cm)
- 3.93701 × 10−8 inches (in)
What Is a Micrometer?
The micrometre (symbol: μm), also known as the micron, is a metric unit of length equal to one millionth (10−6) of a metre, or equivalently, one thousandth of a millimetre. The micrometre is used extensively in science, engineering, and manufacturing for measuring very small dimensions. In semiconductor manufacturing, circuit feature sizes are measured in micrometres (or nanometres for modern chips). The first Intel processor (1971) had 10 μm feature sizes, while modern processors use 3–5 nm (0.003–0.005 μm). In biology, the micrometre is the standard unit for cell biology and microbiology. Most human cells range from 10 to 100 μm in diameter. Red blood cells are about 7 μm, white blood cells 10–15 μm, and most bacteria are 1–10 μm. In materials science, surface roughness is typically measured in micrometres. Paper thickness is about 100 μm, a human hair is about 50–100 μm in diameter, and fine dust particles that pose health risks (PM2.5) are those smaller than 2.5 μm.
One micrometer is equal to:
- 10−6 metres (m)
- 0.001 millimetres (mm)
- 0.0001 centimetres (cm)
- 1,000 nanometres (nm)
- 3.93701 × 10−5 inches (in)
Understanding Length Units
Length is one of the seven fundamental physical quantities in the International System of Units. It measures the distance between two points in space. Length is perhaps the most intuitive physical quantity, as we encounter measurements of distance and size constantly in everyday life.
Two major systems of length measurement are in common use worldwide: the metric system (used by most countries) and the US customary/Imperial system (used primarily in the United States, and partly in the United Kingdom).
The Metric System
The metric system is based on the metre, with larger and smaller units derived using decimal prefixes. This makes conversions within the metric system straightforward — simply move the decimal point:
- Kilometre (km): 1,000 metres — used for geographic distances and travel
- Metre (m): The base unit — used for room dimensions, human height, and general measurements
- Centimetre (cm): 0.01 metres — used for body measurements, small objects, and clothing sizes
- Millimetre (mm): 0.001 metres — used for engineering precision, rainfall, and small components
- Micrometre (μm): 10−6 metres — used for cell biology, thin films, and surface roughness
- Nanometre (nm): 10−9 metres — used for atoms, molecules, light wavelengths, and semiconductor features
The US Customary / Imperial System
The US customary system uses units based on historical definitions that were later standardised in terms of the metre:
- Mile (mi): 5,280 feet = 1,609.344 m — used for road distances in the US and UK
- Yard (yd): 3 feet = 0.9144 m — used in sports (football, golf) and fabric
- Foot (ft): 12 inches = 0.3048 m — used for height, altitude, and building dimensions
- Inch (in): 2.54 cm exactly — used for screen sizes, paper, and precision measurements
Key Conversion Relationships
The most important cross-system conversions to remember are:
- 1 inch = 2.54 cm (exact, by definition since 1959)
- 1 foot = 30.48 cm (exact)
- 1 yard = 0.9144 m (exact)
- 1 mile = 1.609344 km (exact)
All US customary length units are legally defined in terms of the metre, making all conversion factors between the two systems exact values with no rounding error.
Tips for Length Conversions
- Metric conversions only involve factors of 10. Each prefix step (nm → μm → mm → cm → m → km) changes by a specific power of 10.
- Inches to centimetres: Multiply by 2.54. This is the most commonly needed cross-system conversion.
- Feet to metres: Multiply by 0.3048, or approximately 0.3. For a quick estimate, multiply feet by 3 and move the decimal one place left.
- Miles to kilometres: Multiply by 1.609. A handy approximation: add 60% to the mile value (10 miles ≈ 16 km).
- Yards to metres: Multiply by 0.9144. Since 1 yard ≈ 0.914 m, yards and metres are roughly similar in size.
- Quick mental math: 1 metre ≈ 3 feet 3 inches. 1 km ≈ 0.6 miles. 100 km ≈ 62 miles.
- Interesting relationship: The Fibonacci sequence (1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89...) closely approximates the mile-to-kilometre conversion. For example, 5 miles ≈ 8 km, 8 miles ≈ 13 km, 13 miles ≈ 21 km.
- For precision work: All inch/foot/yard/mile to metric conversions are exact values, so there is no rounding error when converting between systems.
Nanometers to Micrometers Conversion Table
The following table shows conversions from nanometers to micrometers.
| Nanometers | Micrometers (µm) |
|---|---|
| 1 nm | 0.001 |
| 2 nm | 0.002 |
| 3 nm | 0.003 |
| 4 nm | 0.004 |
| 5 nm | 0.005 |
| 6 nm | 0.006 |
| 7 nm | 0.007 |
| 8 nm | 0.008 |
| 9 nm | 0.009 |
| 10 nm | 0.01 |
| 11 nm | 0.011 |
| 12 nm | 0.012 |
| 13 nm | 0.013 |
| 14 nm | 0.014 |
| 15 nm | 0.015 |
| 16 nm | 0.016 |
| 17 nm | 0.017 |
| 18 nm | 0.018 |
| 19 nm | 0.019 |
| 20 nm | 0.02 |
| 21 nm | 0.021 |
| 22 nm | 0.022 |
| 23 nm | 0.023 |
| 24 nm | 0.024 |
| 25 nm | 0.025 |
| 26 nm | 0.026 |
| 27 nm | 0.027 |
| 28 nm | 0.028 |
| 29 nm | 0.029 |
| 30 nm | 0.03 |
| 31 nm | 0.031 |
| 32 nm | 0.032 |
| 33 nm | 0.033 |
| 34 nm | 0.034 |
| 35 nm | 0.035 |
| 36 nm | 0.036 |
| 37 nm | 0.037 |
| 38 nm | 0.038 |
| 39 nm | 0.039 |
| 40 nm | 0.04 |