Millinewtons to Dynes Converter

How to Convert Millinewtons to Dynes

To convert a force measurement from millinewtons to dynes, multiply the force value by the conversion factor. Since one millinewton is equal to 100 dynes, you can use this formula:

The force in dynes is equal to the millinewtons multiplied by 100.

How Many Dynes Are in a Millinewton?

There are 100 dynes in one millinewton.

What Is a Millinewton?

The millinewton (symbol: mN) is a unit of force equal to one thousandth (10⁻³) of a newton. The prefix “milli” denotes a factor of 10⁻³ in the International System of Units. Millinewtons are used in precision measurement, small-scale mechanical testing, and surface science. Surface tension forces, which are responsible for phenomena like capillary action and the formation of droplets, are often measured in millinewtons per metre (mN/m). Water has a surface tension of approximately 72.8 mN/m at 20 °C. In small electric motor and actuator design, the torques and forces produced are often specified in millinewtons or millinewton-metres. The thrust produced by miniature propellers and fans for drones and small UAVs may be measured in millinewtons. In analytical chemistry, the weight of small samples placed on precision balances corresponds to forces of a few millinewtons. For reference, the weight of a single grain of rice (about 25–30 mg) is approximately 0.25–0.3 mN.

One millinewton is equal to:

• 0.001 newtons (N)
• 1,000 micronewtons (μN)
• 10⁶ nanonewtons (nN)
• 0.101972 gram-force (gf)
• 10 dynes (dyn)
• 2.2481 × 10⁻⁴ pound-force (lbf)

What Is a Dyne?

The dyne (symbol: dyn) is the unit of force in the centimetre–gram–second (CGS) system of units. It is defined as the force needed to accelerate a mass of one gram at a rate of one centimetre per second squared (1 dyn = 1 g·cm/s²). One dyne equals exactly 10⁻⁵ newtons (10 micronewtons). The dyne was the standard unit of force in physics before the adoption of the SI system in the 1960s. While the newton has replaced it in most modern usage, the dyne still appears in some specialised fields, particularly in surface science and fluid dynamics. In surface science, surface tension is often expressed in dynes per centimetre (dyn/cm), which is equivalent to millinewtons per metre (mN/m). Water has a surface tension of approximately 72.8 dyn/cm at 20 °C. In geophysics, the CGS unit of acceleration (the gal, equal to 1 cm/s²) is used with the dyne in gravitational measurements. The dyne also appears in older physics textbooks and in the CGS Gaussian system of electromagnetic units.

One dyne is equal to:

• 10⁻⁵ newtons (N)
• 0.01 millinewtons (mN)
• 10 micronewtons (μN)
• 1.0197 × 10⁻³ gram-force (gf)
• 2.2481 × 10⁻⁶ pound-force (lbf)
• 7.233 × 10⁻⁵ poundals (pdl)

Understanding Force Units

Force is a fundamental physical quantity that describes an interaction capable of changing the motion of an object. According to Newton’s second law, force equals mass times acceleration (F = ma). Force is a vector quantity, meaning it has both magnitude and direction.

The wide variety of force units reflects the different measurement systems that developed historically across science and engineering. Today, the newton (SI) is the international standard, but gravitational units (kilogram-force, pound-force) and CGS/FPS units (dyne, poundal) remain in use in specific industries and regions.

Major Unit Families

• SI / Metric absolute units: The newton (N) is the SI unit of force, with standard metric prefixes (nN, μN, mN, kN, MN). These are “absolute” units defined in terms of mass, length, and time (1 N = 1 kg·m/s²).
• Gravitational metric units: The gram-force (gf) and kilogram-force (kgf) are defined using standard gravity. One kgf = 9.80665 N exactly. These units directly connect mass to weight.
• Imperial / US customary units: The pound-force (lbf) and ounce-force (ozf) are gravitational units used primarily in the United States. One lbf = 4.44822 N.
• CGS absolute unit: The dyne (dyn) is the CGS system’s force unit (1 dyn = 1 g·cm/s² = 10⁻⁵ N). It is used in some specialised fields.
• FPS absolute unit: The poundal (pdl) is the FPS system’s absolute force unit (1 pdl = 1 lb·ft/s² ≈ 0.1383 N). It is mostly of historical interest.

Force in Everyday Life

• Weight: The weight of a 1 kg object is about 9.81 N (1 kgf). A 70 kg person weighs about 687 N (154.3 lbf).
• Friction: Walking, driving, and braking all depend on friction forces. The braking force of a car can reach 10–20 kN.
• Tension: Ropes, cables, and tendons carry tension forces. Climbing ropes are rated for 8–12 kN of impact force.
• Thrust: Jet engines produce 50–500 kN of thrust, while rocket engines can produce several MN.

Converting Between Force Units

All force units measure the same physical quantity, so converting between them is simply a matter of multiplying by the appropriate conversion factor. The factor is the ratio of how many newtons one unit of the source contains divided by how many newtons one unit of the target contains.

The key conversion constants are: 1 kgf = 9.80665 N (exact), 1 lbf = 4.4482216152605 N (exact), 1 dyn = 10⁻⁵ N (exact), and 1 pdl ≈ 0.138255 N.

Tips for Force Conversions

• For SI metric conversions (nN, μN, mN, N, kN, MN), each prefix step is a factor of 1,000. So 1 kN = 1,000 N = 1,000,000 mN, etc.
• To convert between gravitational units (gf, kgf, lbf, ozf) and absolute units (N, dyn, pdl), you need the standard gravity constant g = 9.80665 m/s².
• One kilogram-force equals exactly 9.80665 newtons. This is exact by definition because g_n = 9.80665 m/s² is a defined constant.
• One pound-force = exactly 4.4482216152605 newtons (= g_n × 1 lb = 9.80665 × 0.45359237).
• There are exactly 16 ounce-force in 1 pound-force, and exactly 1,000 gram-force in 1 kilogram-force.
• The dyne is a very small force: 1 N = 100,000 dyn. The poundal is also small: 1 lbf ≈ 32.174 pdl.
• Quick mental conversion: 1 N ≈ 0.225 lbf, or 1 lbf ≈ 4.45 N. Also 1 kgf ≈ 2.205 lbf.
• Don’t confuse mass and force: “kilogram” is a unit of mass, while “kilogram-force” is a unit of force. A 1 kg object weighs 1 kgf (9.81 N) only at standard gravity.

Millinewtons to Dynes Conversion Table

The following table shows conversions from millinewtons to dynes.

Related Force Converters

Convert from Millinewtons

Convert to Dynes