Gigavolts to Microvolts Converter

Convert gigavolts to microvolts instantly with our free voltage conversion calculator. Enter any value for accurate results.

GV
=
µV
1.0000E+15
Microvolts (µV)
1 GV = 1.0000E+15 µV
🔄 Swap Units (Microvolts → Gigavolts)
1 GV
=
1.0000E+15 µV
1 Gigavolt = 1015 Microvolts

How to Convert Gigavolts to Microvolts

To convert a voltage measurement from gigavolts to microvolts, multiply the voltage by the conversion factor. Since one gigavolt is equal to 1015 microvolts, you can use this formula:

microvolts = gigavolts × 1015

The voltage in microvolts is equal to the gigavolts multiplied by 1015.

Example: Convert 5 gigavolts to microvolts.

Using the formula: microvolts = gigavolts × 1015

microvolts = 5 GV × 1015 = 5.0000E+15 µV

Therefore, 5 gigavolts equals 5.0000E+15 microvolts.

How Many Microvolts Are in a Gigavolt?

There are 1015 microvolts in one gigavolt.

1 GV = 1015 µV

What Is a Gigavolt?

The gigavolt (symbol: GV) is a unit of electric potential equal to one billion (109) volts. The prefix “giga” denotes a factor of 109 in the International System of Units. Gigavolts are primarily a theoretical and astrophysical unit, as no practical human-made device produces sustained potentials of this magnitude. However, the concept is important in several scientific contexts. In astrophysics, pulsars (rapidly rotating neutron stars) can generate electric fields with potential differences of up to 1012–1015 V (103–106 GV) near their magnetic poles. These extreme voltages accelerate particles to ultra-relativistic speeds, producing the observed radio, X-ray, and gamma-ray emissions. In cosmic ray physics, the most energetic cosmic rays (with energies above 1018 eV) would require acceleration through potentials of approximately 1 GV or more. The mechanisms producing such extreme accelerations in nature (supernova remnants, active galactic nuclei) are an active area of research. In high-energy physics theory, the Schwinger limit — the electric field strength at which the vacuum spontaneously produces electron-positron pairs — corresponds to about 1.3 × 1018 V/m (over a Compton wavelength, this represents about 1 GV).

One gigavolt is equal to:

  • 109 volts (V)
  • 106 kilovolts (kV)
  • 1,000 megavolts (MV)
  • 1012 millivolts (mV)
  • 3.3356 × 106 statvolts (stV)
  • 1017 abvolts (abV)

What Is a Microvolt?

The microvolt (symbol: μV) is a unit of electric potential equal to one millionth (10−6) of a volt. The prefix “micro” denotes a factor of 10−6 in the International System of Units. Microvolts are important in biomedical instrumentation, audio engineering, and precision measurement. Electroencephalography (EEG) signals from the brain are typically 10–100 μV in amplitude. Electrocardiogram (ECG) signals from the heart range from about 100 μV to 3 mV. In audio engineering, the output of moving-coil phono cartridges is typically 0.2–0.5 mV (200–500 μV), requiring specialised phono preamplifiers. Microphone sensitivities are sometimes specified in microvolts per pascal. In electronics, the input offset voltage of precision operational amplifiers can be as low as 1–10 μV, and the noise floor of sensitive receivers is often measured in microvolts.

One microvolt is equal to:

  • 10−6 volts (V)
  • 1,000 nanovolts (nV)
  • 0.001 millivolts (mV)
  • 10−9 kilovolts (kV)
  • 3.3356 × 10−9 statvolts (stV)
  • 10,000 abvolts (abV)

Understanding Voltage Units

Voltage (also called electric potential difference or electromotive force) is a measure of the work needed to move a unit electric charge from one point to another in an electric field. It is one of the most fundamental quantities in electricity and electronics, analogous to pressure in a water system.

Ohm’s law (V = I × R) relates voltage (V) to current (I) and resistance (R), and the power equation (P = V × I) connects voltage to electrical power. These relationships are the foundation of all electrical engineering.

Major Voltage Unit Systems

  • SI units (V with metric prefixes): The volt (V) is the SI derived unit of electric potential. Standard metric prefixes produce nanovolts (nV), microvolts (μV), millivolts (mV), kilovolts (kV), megavolts (MV), and gigavolts (GV). Each prefix step is a factor of 1,000.
  • CGS electrostatic unit — Statvolt (stV): The voltage unit in the Gaussian/ESU system. One statvolt equals exactly 299.792458 V, a factor derived from the speed of light. Used in some theoretical physics contexts.
  • CGS electromagnetic unit — Abvolt (abV): The voltage unit in the EMU system. One abvolt equals exactly 10−8 V (10 nanovolts). An extremely small unit, primarily of historical interest.

Voltage in Everyday Life

  • Batteries: AA/AAA cells = 1.5 V, 9 V battery, car battery = 12 V, smartphone = 3.7–4.2 V.
  • Household mains: 120 V (North America, Japan) or 230 V (Europe, Asia, Africa) at 50 or 60 Hz AC.
  • USB power: USB 2.0/3.0 = 5 V, USB-C PD = 5/9/15/20 V (up to 48 V in Extended Power Range).
  • Power transmission: 110–765 kV for long-distance lines, 4–35 kV for local distribution.
  • Lightning: 100–300 MV potential difference, 20,000–200,000 A peak current.
  • Static electricity: Walking on carpet can generate 1–25 kV.

Converting Between Voltage Units

SI voltage conversions follow simple powers of 10: each metric prefix step (nano → micro → milli → base → kilo → mega → giga) is a factor of 1,000. For CGS units, the key factors are: 1 stV = 299.792458 V (from the speed of light) and 1 abV = 10−8 V (exact).

Tips for Voltage Conversions

  • For SI prefix conversions (nV, μV, mV, V, kV, MV, GV), each step is a factor of 1,000. So 1 kV = 1,000 V = 1,000,000 mV, and 1 V = 1,000 mV = 1,000,000 μV.
  • The statvolt factor (299.792458 V) comes from the speed of light: c = 299,792,458 m/s, and 1 stV = c/(106) V. This is an exact value.
  • The abvolt is exactly 10 nanovolts (10−8 V). This is a very small voltage — it takes 100 million abvolts to make 1 volt.
  • The relationship between statvolts and abvolts involves c²: 1 stV = c² × 10−8 abV ≈ 2.998 × 1010 abV.
  • When dealing with very large or very small numbers, scientific notation is helpful: 1 GV = 109 V, and 1 nV = 10−9 V.
  • Don’t confuse voltage (electric potential, measured in volts) with current (charge flow, measured in amperes) or resistance (opposition to current, measured in ohms). Voltage “pushes” current through resistance.
  • In practice, kilovolts are the most common “large” voltage unit (power lines, X-rays), while millivolts and microvolts are common “small” units (sensors, biomedical signals).

Gigavolts to Microvolts Conversion Table

The following table shows conversions from gigavolts to microvolts.

GigavoltsMicrovolts (µV)
1.0000E-14 GV10
2.0000E-14 GV20
3.0000E-14 GV30
4.0000E-14 GV40
5.0000E-14 GV50
6.0000E-14 GV60
7.0000E-14 GV70
8.0000E-14 GV80
9.0000E-14 GV90
1.0000E-13 GV100
2.0000E-13 GV200
3.0000E-13 GV300
4.0000E-13 GV400
5.0000E-13 GV500
6.0000E-13 GV600
7.0000E-13 GV700
8.0000E-13 GV800
9.0000E-13 GV900
1.0000E-12 GV1,000
2.0000E-12 GV2,000
3.0000E-12 GV3,000
4.0000E-12 GV4,000
5.0000E-12 GV5,000
6.0000E-12 GV6,000
7.0000E-12 GV7,000
8.0000E-12 GV8,000
9.0000E-12 GV9,000
1.0000E-11 GV10,000

Related Voltage Converters

Convert from Gigavolts

Convert to Microvolts