Gigabytes to Megabits Converter

Convert gigabytes to megabits instantly with our free data storage conversion calculator. Enter any value for accurate results using the binary (1024) convention.

GB
=
Mb
8,192
Megabits (Mb)
1 GB = 8,192 Mb
🔄 Swap Units (Megabits → Gigabytes)
1 GB
=
8,192 Mb
1 Gigabyte = 8,192 Megabits

How to Convert Gigabytes to Megabits

To convert a data storage measurement from gigabytes to megabits, multiply the value by the conversion factor. Since one gigabyte is equal to 8,192 megabits, you can use this formula:

megabits = gigabytes × 8,192

The data storage in megabits is equal to the gigabytes multiplied by 8,192.

Example: Convert 5 gigabytes to megabits.

Using the formula: megabits = gigabytes × 8,192

megabits = 5 GB × 8,192 = 40,960 Mb

Therefore, 5 gigabytes equals 40,960 megabits.

How Many Megabits Are in a Gigabyte?

There are 8,192 megabits in one gigabyte.

1 GB = 8,192 Mb

What Is a Gigabyte?

The gigabyte (symbol: GB) is a unit of digital information equal to 1,073,741,824 bytes (230) in the binary system, or 1,000,000,000 bytes in the decimal system. Gigabytes are one of the most commonly used units for expressing storage capacity and data quantities. The gigabyte is commonly used interchangeably with the gibibyte (GiB), which is the IEC standard name for exactly 230 bytes. This distinction matters for storage devices: a "256 GB" SSD using the decimal definition actually holds about 238 GiB in binary terms. Gigabytes are used to measure the capacity of USB flash drives, smartphone storage, RAM, and medium-sized files. A typical HD movie is 1–4 GB, a full-length audiobook about 200–500 MB, a modern smartphone app 50–500 MB, and a video game 10–100+ GB. Smartphone storage capacities are typically 64 GB, 128 GB, 256 GB, or 512 GB. Monthly mobile data plans commonly offer 2–100 GB of usage. A typical laptop has 8–32 GB of RAM and 256 GB to 2 TB of storage.

One gigabyte is equal to:

  • 1,073,741,824 bytes (B)
  • 1,024 megabytes (MB)
  • 8,589,934,592 bits (b)
  • 8 gigabits (Gb)
  • 1/1,024 terabytes (TB)

What Is a Megabit?

The megabit (symbol: Mb) is a unit of digital information equal to 1,048,576 bits (1,024 × 1,024, or 220) in the binary system, or 1,000,000 bits in the decimal system. In computing and networking, both definitions are used depending on context. Megabits are most commonly encountered in internet speed ratings. Consumer broadband speeds are typically advertised in megabits per second (Mbps). Common internet plans range from 25 Mbps to 1,000 Mbps (1 Gbps), with typical streaming requirements of about 5 Mbps for HD video and 25 Mbps for 4K video. It is important to distinguish between megabits (Mb) and megabytes (MB). Since 1 byte = 8 bits, 1 megabyte = 8 megabits. When downloading a file at 100 Mbps, the actual data transfer rate is about 12.5 megabytes per second. This distinction often causes confusion among consumers comparing internet speeds with file sizes. The IEC standard defines the mebibit (Mib) as exactly 1,048,576 bits (220) to distinguish from the SI megabit of 1,000,000 bits. This converter uses the binary convention of 1,024 kilobits per megabit.

One megabit is equal to:

  • 1,048,576 bits (b)
  • 1,024 kilobits (kb)
  • 131,072 bytes (B)
  • 128 kilobytes (kB)
  • 0.125 megabytes (MB)

Understanding Data Storage Units

Data storage units measure the amount of digital information that can be stored, transmitted, or processed. The fundamental unit is the bit (binary digit), which can hold a value of 0 or 1. All digital information, from text documents to 4K videos, is ultimately represented as sequences of bits.

Data storage units are organized in two main hierarchies: bits (b, kb, Mb, Gb, Tb, Pb, Eb) and bytes (B, kB, MB, GB, TB, PB, EB). The relationship between them is that 1 byte = 8 bits. Bits are typically used for data transfer rates (internet speed), while bytes are used for storage capacity (file sizes, drive capacity).

Binary vs. Decimal Prefixes

There are two conventions for data storage prefixes, which can cause confusion:

  • Binary (base-2): Each prefix step is a factor of 1,024 (210). So 1 kB = 1,024 B, 1 MB = 1,024 kB, etc. This is used by operating systems and in most computing contexts. This converter uses the binary convention.
  • Decimal (base-10): Each prefix step is a factor of 1,000. So 1 kB = 1,000 B, 1 MB = 1,000 kB, etc. This is used by storage device manufacturers and in telecommunications.

To avoid confusion, the IEC introduced binary prefixes: kibibyte (KiB = 1,024 B), mebibyte (MiB = 1,024 KiB), gibibyte (GiB = 1,024 MiB), etc. However, these names are not widely used in everyday language.

Common Data Sizes in Perspective

  • 1 Bit: A single binary digit (0 or 1)
  • 1 Byte (8 bits): One text character (ASCII)
  • 1 Kilobyte (1,024 bytes): A short paragraph of text
  • 1 Megabyte (1,024 kB): A compressed photo or one minute of MP3 audio
  • 1 Gigabyte (1,024 MB): About 250 MP3 songs or a short HD video
  • 1 Terabyte (1,024 GB): About 250,000 photos or 500 hours of HD video
  • 1 Petabyte (1,024 TB): About 1,000 consumer hard drives
  • 1 Exabyte (1,024 PB): Roughly 11 million hours of 4K video

Data Transfer Rates vs. Storage

An important distinction exists between data transfer rates and storage capacity:

  • Transfer rates use bits per second: kbps, Mbps, Gbps (note lowercase 'b')
  • Storage capacity uses bytes: kB, MB, GB, TB (note uppercase 'B')

To convert between them, divide the bit rate by 8 to get the byte rate. For example, a 100 Mbps internet connection can transfer at most 12.5 MB per second (100 / 8 = 12.5).

Tips for Data Storage Conversions

  • To convert between adjacent byte units (kB → MB → GB → TB → PB → EB), divide by 1,024 to go up or multiply by 1,024 to go down. The same applies to bit units (kb → Mb → Gb → Tb → Pb → Eb).
  • To convert between bits and bytes at the same prefix level, divide bits by 8 to get bytes, or multiply bytes by 8 to get bits. For example: 100 Mb = 12.5 MB.
  • When comparing internet speed (in Mbps) with file size (in MB), divide the speed by 8 to estimate download time. A 100 Mbps connection downloads at about 12.5 MB/s, so a 1 GB file takes about 80 seconds.
  • Storage manufacturers use decimal (1 GB = 1,000,000,000 bytes) while operating systems use binary (1 GB = 1,073,741,824 bytes). This is why a "500 GB" drive shows as about 465 GB in your OS.
  • A nibble is exactly 4 bits (half a byte) and represents one hexadecimal digit. Two nibbles make one byte.
  • Memory (RAM) sizes always use binary: 4 GB, 8 GB, 16 GB, 32 GB. These are exact powers of 2 in bytes.
  • When estimating storage needs: text files are measured in kB, photos and songs in MB, movies and games in GB, hard drives in TB, and data centers in PB or EB.

Gigabytes to Megabits Conversion Table

The following table shows conversions from gigabytes to megabits, using the binary convention (1 kB = 1,024 B).

GigabytesMegabits (Mb)
1 GB8,192
2 GB16,384
3 GB24,576
4 GB32,768
5 GB40,960
6 GB49,152
7 GB57,344
8 GB65,536
9 GB73,728
10 GB81,920
11 GB90,112
12 GB98,304
13 GB106,496
14 GB114,688
15 GB122,880
16 GB131,072
17 GB139,264
18 GB147,456
19 GB155,648
20 GB163,840
21 GB172,032
22 GB180,224
23 GB188,416
24 GB196,608
25 GB204,800
26 GB212,992
27 GB221,184
28 GB229,376
29 GB237,568
30 GB245,760
31 GB253,952
32 GB262,144
33 GB270,336
34 GB278,528
35 GB286,720
36 GB294,912
37 GB303,104
38 GB311,296
39 GB319,488
40 GB327,680

Related Data Storage Converters

Convert from Gigabytes

Convert to Megabits