Atmospheres to Pounds per Square Inch Converter

How to Convert Atmospheres to Pounds per Square Inch

To convert a pressure measurement from atmospheres to pounds per square inch, multiply the pressure value by the conversion factor. Since one atmosphere is equal to 14.69595 pounds per square inch, you can use this formula:

The pressure in pounds per square inch is equal to the atmospheres multiplied by 14.69595.

How Many Pounds per Square Inch Are in a Atmosphere?

There are 14.69595 pounds per square inch in one atmosphere.

What Is a Atmosphere?

The standard atmosphere (symbol: atm) is a unit of pressure defined as exactly 101,325 pascals (101.325 kPa). It approximates the average atmospheric pressure at sea level at 15 °C. The atmosphere is widely used as a reference pressure in chemistry, physics, and engineering. Standard temperature and pressure (STP) conditions are defined as 0 °C and 1 atm. Many gas laws, chemical equilibria, and thermodynamic tables use the atmosphere as the standard pressure reference. In diving, the atmosphere provides an intuitive measure of underwater pressure. Water pressure increases by approximately 1 atm for every 10 metres (33 feet) of depth. At 30 metres depth, a diver experiences about 4 atm of absolute pressure (1 atm atmospheric + 3 atm water). Tyre pressure gauges often display readings in atmospheres in some countries. A typical car tyre is inflated to about 2–2.5 atm (gauge pressure), which is 3–3.5 atm absolute. The atmosphere was originally defined by the weight of a column of mercury 760 mm high at 0 °C under standard gravity, which led to the exact definition 1 atm = 101,325 Pa.

One atmosphere is equal to:

• 101,325 pascals (Pa)
• 1,013.25 hectopascals (hPa)
• 1.01325 bars (bar)
• 1,013.25 millibars (mbar)
• 1.03323 kilogram-force per square centimetre (kgf/cm²)
• 14.6959 pounds per square inch (psi)
• 760 torr (Torr)

What Is a Pound per Square Inch?

The pound per square inch (symbol: psi or lbf/in²) is a unit of pressure in the US customary and imperial systems, defined as the pressure exerted by a force of one pound-force on an area of one square inch. One psi equals approximately 6,894.76 pascals. Psi is one of the most widely used pressure units in the United States and is common in engineering, automotive, aerospace, and industrial applications. Tyre pressures, hydraulic system pressures, water line pressures, and compressed gas cylinder pressures in the US are all specified in psi. Typical tyre pressures for passenger vehicles are 30–35 psi. Residential water pressure is typically 40–80 psi. A scuba tank holds air at about 3,000 psi. Industrial hydraulic systems operate at 1,500–5,000 psi, and water-jet cutting systems use pressures of 30,000–90,000 psi. In materials testing, the tensile strength and yield strength of metals are often reported in psi or ksi (kilopounds per square inch, where 1 ksi = 1,000 psi). Structural steel typically has a yield strength of 36,000–50,000 psi. The abbreviations “psig” (gauge pressure) and “psia” (absolute pressure) are used to distinguish between pressures measured relative to atmospheric pressure and absolute vacuum, respectively.

One pound per square inch is equal to:

• 6,894.76 pascals (Pa)
• 68.9476 hectopascals (hPa)
• 0.0689476 bars (bar)
• 68.9476 millibars (mbar)
• 0.068046 atmospheres (atm)
• 0.070307 kgf/cm²
• 144 pounds per square foot (psf)
• 51.7149 torr (Torr)

Understanding Pressure Units

Pressure is the force applied perpendicular to a surface per unit area (P = F/A). It is a fundamental concept in physics, engineering, meteorology, medicine, and many other fields. Pressure is a scalar quantity, meaning it acts equally in all directions within a fluid at a given point.

The wide variety of pressure units reflects the diverse fields in which pressure is measured. The pascal (SI) is the international standard, but industry-specific units like psi, bar, atm, and torr remain firmly established in their respective domains.

Major Pressure Unit Families

• SI units: The pascal (Pa) is the SI unit of pressure. With prefixes: hectopascal (hPa = 100 Pa), kilopascal (kPa = 1,000 Pa), megapascal (MPa = 10⁶ Pa), gigapascal (GPa = 10⁹ Pa).
• Bar units: The bar (100,000 Pa) and millibar (100 Pa) are metric units widely used in industry and meteorology. The millibar equals the hectopascal exactly.
• Atmospheric units: The standard atmosphere (101,325 Pa) is a reference pressure used in chemistry and physics. The torr (1/760 atm) is used in vacuum science.
• Gravitational metric units: The kgf/cm² (technical atmosphere) and kgf/m² use gravitational force units on metric areas.
• Imperial / US customary units: Pounds per square inch (psi) and pounds per square foot (psf) are standard in US engineering and construction.

Pressure in Everyday Life

• Atmosphere: Standard atmospheric pressure at sea level is about 101.3 kPa (14.7 psi, 1013 hPa, 760 Torr). This is the weight of the air column above us.
• Tyres: Car tyre pressure is typically 30–35 psi (2.0–2.4 bar). Under-inflated tyres waste fuel and wear unevenly.
• Blood pressure: Measured in mmHg (≈ Torr). Normal is about 120/80 mmHg. High blood pressure (hypertension) is above 140/90 mmHg.
• Weather: Barometric pressure ranges from about 870–1085 hPa. Falling pressure indicates approaching storms; rising pressure indicates clearing skies.
• Water pressure: Pressure increases by about 1 atm per 10 m (33 ft) of water depth. At the bottom of the Mariana Trench (~11 km), pressure exceeds 1,000 atm.

Converting Between Pressure Units

All pressure units measure the same physical quantity, so converting between them requires multiplying by the appropriate conversion factor. The factor is the ratio of how many pascals one unit of the source contains divided by how many pascals one unit of the target contains.

Key conversion constants: 1 atm = 101,325 Pa = 1.01325 bar = 14.696 psi = 760 Torr. Also, 1 bar = 100,000 Pa and 1 psi ≈ 6,894.76 Pa.

Tips for Pressure Conversions

• The hectopascal and millibar are exactly equal (1 hPa = 1 mbar = 100 Pa). They can be used interchangeably.
• The bar is very close to the atmosphere: 1 atm = 1.01325 bar. For rough estimates, 1 bar ≈ 1 atm.
• Quick psi ↔ bar conversion: 1 bar ≈ 14.5 psi. So divide psi by 14.5 to get bars, or multiply bars by 14.5 to get psi.
• For atm ↔ psi: 1 atm ≈ 14.7 psi. A common tyre pressure of 32 psi is about 2.2 atm (gauge) or 3.2 atm (absolute).
• The torr is nearly equal to 1 mmHg. For blood pressure and vacuum measurements, they’re practically interchangeable.
• Exactly 760 torr = 1 atm. This comes from the original barometer definition.
• For kgf/cm² ↔ bar: they’re very close. 1 kgf/cm² = 0.981 bar. For rough work, 1 kgf/cm² ≈ 1 bar.
• Remember that 1 psi = 144 psf (since 1 ft² = 144 in²). This is an exact relationship.
• Be aware of gauge vs. absolute pressure. Gauge pressure is measured relative to atmospheric pressure (0 psig = 1 atm absolute = 14.7 psia).

Atmospheres to Pounds per Square Inch Conversion Table

The following table shows conversions from atmospheres to pounds per square inch.

Related Pressure Converters

Convert from Atmospheres

Convert to Pounds per Square Inch