Abohms to Kiloohms Converter

How to Convert Abohms to Kiloohms

To convert an electrical resistance measurement from abohms to kiloohms, divide the resistance value by the conversion factor. Since one abohm is equal to 10^-12 kiloohms, you can use this formula:

The resistance in kiloohms is equal to the abohms divided by 10¹².

How Many Kiloohms Are in a Abohm?

There are 10^-12 kiloohms in one abohm.

What Is a Abohm?

The abohm (symbol: abΩ) is the unit of electrical resistance in the centimetre–gram–second electromagnetic (CGS-EMU) system of units. One abohm equals exactly 10⁻⁹ ohms (one nanoohm). The abohm is defined from the fundamental CGS-EMU electromagnetic relations. In the EMU system, the unit of current (abampere = 10 amperes) is defined in terms of the magnetic force between current-carrying conductors, and the other electrical units follow from this. The abohm is the ratio of one abvolt to one abampere. Because 1 abohm equals exactly 1 nanoohm, the abohm represents a very small resistance. The resistance of short lengths of thick copper wire, busbar joints, and superconductor connections at cryogenic temperatures falls in the abohm range. Like other CGS electromagnetic units, the abohm is primarily of historical and pedagogical interest. It was used in early electrical engineering and physics before the adoption of the international (later SI) system of units. Understanding the abohm and its relationship to the ohm helps in reading older scientific literature and understanding the development of electromagnetic unit systems. The relationship between abohm and statohm illustrates the role of the speed of light in connecting the ESU and EMU systems: 1 statΩ = c² abΩ (where c is in CGS units).

One abohm is equal to:

• 10⁻⁹ ohms (Ω) = 1 nanoohm
• 0.001 microohms (μΩ)
• 10⁻⁶ milliohms (mΩ)
• 10⁻¹² kiloohms (kΩ)
• 1.1127 × 10⁻²¹ statohms (statΩ)

What Is a Kiloohm?

The kiloohm (symbol: kΩ) is a unit of electrical resistance equal to one thousand (10³) ohms. The prefix “kilo” denotes a factor of 1,000 in the International System of Units. Kiloohms are among the most commonly used resistance values in electronics. Pull-up and pull-down resistors, voltage dividers, biasing networks, and feedback resistors in analogue circuits frequently have values in the kiloohm range. Standard resistor values in the kiloohm range include 1 kΩ, 2.2 kΩ, 4.7 kΩ, 10 kΩ, 47 kΩ, and 100 kΩ. The popular 10 kΩ resistor is one of the most commonly used components in electronics, serving as a default pull-up/pull-down resistor, voltage divider element, and signal conditioning component. In sensor circuits, thermistors and photoresistors typically have resistances in the kiloohm range. A standard NTC thermistor might be rated at 10 kΩ at 25 °C, while a light-dependent resistor (LDR) might range from 1 kΩ (bright light) to several hundred kiloohms (darkness). In audio electronics, potentiometers for volume control are typically 10–100 kΩ, and the input impedance of audio amplifiers is usually 10–47 kΩ.

One kiloohm is equal to:

• 1,000 ohms (Ω)
• 10⁶ milliohms (mΩ)
• 0.001 megaohms (MΩ)
• 10¹² nanoohms (nΩ)
• 10¹² abohms (abΩ)
• 1.1127 × 10⁻⁹ statohms (statΩ)

Understanding Electrical Resistance Units

Electrical resistance is a measure of the opposition to the flow of electric current through a conductor. It is defined by Ohm’s law as the ratio of voltage to current (R = V/I). Resistance depends on the material’s resistivity, the length of the conductor, and its cross-sectional area (R = ρL/A).

Resistance converts electrical energy into heat, which is the basis of resistive heating in toasters, electric heaters, and incandescent light bulbs. In electronic circuits, resistors are used to control current flow, divide voltages, bias active components, and set time constants.

Major Resistance Unit Families

• SI units: The ohm (Ω) is the SI unit of resistance, with standard metric prefixes: nanoohm (nΩ = 10⁻⁹ Ω), microohm (μΩ = 10⁻⁶ Ω), milliohm (mΩ = 10⁻³ Ω), kiloohm (kΩ = 10³ Ω), megaohm (MΩ = 10⁶ Ω), and gigaohm (GΩ = 10⁹ Ω).
• CGS-EMU unit: The abohm (abΩ) is the resistance unit in the electromagnetic CGS system. 1 abΩ = 10⁻⁹ Ω = 1 nΩ.
• CGS-ESU unit: The statohm (statΩ) is the resistance unit in the electrostatic CGS system. 1 statΩ ≈ 8.988 × 10¹¹ Ω, an extremely large value reflecting the different scaling of ESU electrical quantities.

Resistance in Everyday Life

• Wiring: Household copper wiring has very low resistance (milliohms per metre) to minimise voltage drops and heating.
• Electronics: Resistors in circuits range from fractions of an ohm (current sense) to megaohms (high-impedance inputs).
• Insulation: Good electrical insulation has resistance in the megaohm to gigaohm range, preventing current leakage.
• Human body: Dry skin has a resistance of 10,000–100,000 Ω, but wet skin can be as low as 1,000 Ω, which is why water and electricity are dangerous together.

Converting Between Resistance Units

All resistance units measure the same physical quantity, so converting between them requires multiplying by the appropriate conversion factor. For SI prefixed units, each step is a factor of 1,000. The CGS units involve the speed of light constant for the statohm, while the abohm is simply 10⁻⁹ ohms.

Tips for Resistance Conversions

• For SI prefix conversions (nΩ, μΩ, mΩ, Ω, kΩ, MΩ, GΩ), each step is a factor of 1,000. So 1 kΩ = 1,000 Ω = 1,000,000 mΩ.
• The abohm is exactly equal to the nanoohm: 1 abΩ = 1 nΩ = 10⁻⁹ Ω. They’re interchangeable.
• The statohm is an enormous unit: 1 statΩ ≈ 899 GΩ. It is rarely used in modern practice.
• To convert ohms to kiloohms, divide by 1,000. To convert kiloohms to megaohms, divide by 1,000 again.
• Resistor colour codes and standard values (E-series) are always expressed in ohms. A “4.7k” resistor is 4,700 Ω = 4.7 kΩ.
• In schematics, resistance values are often shortened: 4k7 = 4.7 kΩ, 2M2 = 2.2 MΩ, 47R = 47 Ω.
• The relationship between statohm and abohm involves the speed of light squared: 1 statΩ = c² × 1 abΩ (in CGS units), or about 8.988 × 10²⁰ abohms.
• When measuring very low resistances (milliohms and below), always use four-terminal (Kelvin) connections to eliminate lead resistance errors.

Abohms to Kiloohms Conversion Table

The following table shows conversions from abohms to kiloohms.

Related Resistance Converters

Convert from Abohms

Convert to Kiloohms